Consolemaps

Vehicle History Overview

  • They don’t make them like they used to.

The First Cars

  • The first motor cars were nothing more than a buggy and engine (Generally repaired by blacksmiths and carpenters. These cars were very expensive, which only the wealthy could afford)
  • Model T was the first car mass production on an assembly line in 1908 (Ford’s Vision was to produce an affordable car the average person could purchase)
  • Model T’s came in black only to keep the costs down. (The price came down once the assembly line was streamlined, but in 1908, the cost for a Model T started at $825. By 1913 the cost of the car reduced to $550)

Cars in the 1960s

Cars were made the same basic way up through the 60s

  • Body Over Frame
  • Rear Wheel Drive (Same concept, but the cars were very big, bulky, and heavy)

Except people in the 60s wanted SPEED! They achieved this with Big Block Motors, which created a lot of Horsepower. (The Birth of Hotrods, Rat Fink, Flames, and Pin Striping).

Cars in the 1970s

  • The government place strict fuel economy and emissions control laws
  • Customers demanded cars with increased fuel economy
  • New laws and customer demands started the automotive explosion of engineering ideas and changes in the automotive industry

Changes to comply with Demands and Laws

  • Smaller bodied cars and smaller engines
  • Aerodynamics (Increase Fuel Mileage)
  • Lighter cars by using different materials and designs
  • More work-hardened areas created during formation of panel (Body Lines)
  • Safety

Construction of Interstate Highways + Higher Speed Limits + More High Performance Cars = Accidents and More

Deaths from Auto Accidents

Federal Laws were passed to regulate safety. These laws included:

  • Installation of seatbelts
  • Safety glass windshields
  • Head restraints
  • In 1979, the first driver side airbag was introduced
  • Airbags are mandatory in motor cars produced after 1990
  • Unibody Torque Boxes: Allow controlled twisting and crushing
  • Crush Zones: Made to collapse during collision (To act as an absorber, absorbing the impact)

Modern Day Cars

  • Carbon Fiber Parts
  • Aluminum Parts
  • More Plastic Parts
  • High Strength Steel
  • Boron Steel
  • Unibody Construction
  • Space Frame Construction
  • Computer
  • Hybrid Cars

Now they even have cars that will tell you when you’re lost, where to turn, Parallel Park for you.

Conclusion

While the modern day cars appear to be made cheap and unsafe, they are actually designed to crush or collapse, while transferring the energy around the stronger passenger compartment to protect the passengers from injury.

There is considerably more damage to modern day cars during a collision than the older vehicles, which gives the perception that “they don’t make them like they used to”. However, in reality the cars are taking the impact instead of the passengers.

The lesson was designed to give you a little history, but to also emphasize that just a hammer, dolly and a few wrenches are not going to repair today’s cars. We need highly trained collision repair and automotive technicians to repair today’s vehicles.

 

It is always interesting to study the history of weddings of different cultures. One can find that some of the old traditions have been carried forward to the current weddings.

In Italy, to this day marriages are not performed during Lent and Advent in May or August. Sunday was declared the best day for the marriage and June was (and is) considered the ideal month to marry. This is based on the Roman goddess Junio, representing safety of home, marriage, and childbirth.

In some families the marriages were arranged by the families of the bride and groom. A male relative of the groom would visit with the father of the intended bride and ask for her hand in marriage. Sometimes a matchmaker was used to carry a message to the intended bride’s family. Once an agreement between the families was reached, the couple was declared engaged. The prospective bride was expected to immediately start gathering clothing (even for her future husband), furniture, and other items for the home. This became known as the bride’s ‘trousseau’. If the engagement ring contained gold it was not to be worn until she received the gold wedding band as it was seen as bad luck to wear gold without being married.

In olden times a great deal of the Italian wedding traditions consisted of warding off evil spirits. The groom would be sure to have something iron on his person to ward off the evil eye. The wedding veil was for the purpose of warding off evil spirits they may try to attack the bride and tearing the veil after the ceremony was considered good luck. The bride was not to have a complete bridal gown until the wedding day. It was to remain incomplete until she walked down the church aisle. Presumably a final stitch was made somewhere on the dress at the entrance of the church. The groom would wait at the front of the church and present the bride with a bouquet of flowers and herbs, to ward off the evil spirits.

At other times the groom would pick the bride up and walk her to the church. In this case a log and a saw would be placed in their path and they had to saw it into two pieces to show their union. If the bride walked to the church, without the groom, the local people often put things in her path such as a broom, beggar, crying baby. How she handled these items showed if she would be a good wife, mother, would be kind, etc.

In the ceremony the groom stood to the right of the bride, thus freeing his sword hand, just in case someone tried to steal his bride. Ten witnesses were required to make the ceremony official; hence the need for a large bridal party. They were dressed like the bride and groom to confuse the jealous spirits. The bride carried (and still does in most weddings) a silk or satin purse for guests to deposit their money gifts in as a way to help with the expenses. Another way money was raised was by the best man cutting the groom’s tie into pieces and selling them to guests at the wedding.

Following the ceremony the bride and groom were pelted with almonds (in mesh bags), three for children and five to seven to promote fertility. In ancient times a loaf of bread was broken over the bride’s head to represent fertility. At the end of the wedding the bride and groom broke a vase or glass into pieces with the number of shards representing how many years they would be married. Mothers-in-law sat at a table and kept a record of the repayment of favors or money which needed to be witnessed (this is still done in some of today’s ceremonies)

Most of the ceremonies started with mass in the early morning, followed by music and dancing throughout the night. Food was, and is, a large part of the wedding. Thirteen or more courses were ordinarily served (a large meal is still served at today’s weddings); this represented the union of the couple and their families.

It’s amazing how many wedding traditions still remain even though they may have evolved somewhat to reflect today’s society. Incorporating traditions based on heritage is often a good way to honor the old while celebrating the new.

Some people think that automotive fasteners are only useful in automotive industries because of its name. However, such items are also depended upon by aerospace, petrochemical, waste processing, pharmaceutical and even machine industries. Typically, a fastener is derived from materials most specifically metals like iron, aluminum, brass, nickel and stainless steel.

Automotive fasteners are defined as mechanical components in order to hold two or more structures together. They are classified further as nuts, screw, rivets, studs, pins and tie rods. Each of these classifications has its own distinct characteristics. More facts on some of these types of fasteners are discussed in detail through the succeeding paragraphs.

Automotive nuts

Nuts are examples of fasteners used in order to secure a bolt or screw to a certain surface. Depending on the application where it is to be utilized, the nut is classified. Some examples of nuts are also classified depending on its shape and design. In this regard, subcategories include hex nuts, wing nuts, cap nuts and t-nuts. Lug nuts, plate nuts, jam nuts and self-locking nuts are also popular in a lot of automotive industries.

Automotive bolts

These are generally classified as threaded automotive fasteners with threaded pins or rods. Typically, it is easy to detect a bolt because it contains a head on one of its end. Bolts are offered in the market in different sizes and may only be placed depending on the hole’s size where it is to be used. The most common types of automotive bolts are wheel bolts, U-bolts, mounting plate bolts and hub bolts. Rod bolts, lug bolts and radiator bolts are also included in the list.

Automotive washers

Just by hearing the term washer, one may not be able to comprehend well about why it is classified under the list of auto fasteners. Well, automotive washers are those that have small and flat dishes containing holes on its center and are used to hold a load of automotive bolts. It is often found below the nut or the joint in order to prevent leakage as well as distribute pressure. Common examples of automotive washers are bolt lock, hardened, cylinder head, lug nut and radiator washers.

Other types of fasteners

Aside from the three types elaborated above, there are yet other forms of fasteners offered in the market. Studs, for instance are those that have double-ended features and are fastened at both ends. These fasteners are classified according to where they are used and the material utilized to make up such industrial products. Other automotive fasteners are rivets, screws and tie rods.

Who doesn’t like to splurge when they are on vacation? Why would anybody prefer to fit their enjoyment within a budget? Everybody wants to make the most of their vacations, and watching your budget while vacationing does not make for much fun. Just because you are on a budget doesn’t mean you can’t have a little luxury in your life. For many vacationers, the uncertainty of how much a vacation will end up costing leaves them apprehensive about traveling. There are over four hundred all inclusive hotels and resorts spread around the Caribbean which are expressly designed for people who want to be pampered and to enjoy world-class food, drinks, and activities without having to worry about busting their budgets. All inclusive vacations give vacationers the option of making the most of the money they have available – and their popularity, with guests returning year after year, attest to the fact that all inclusive is an ideal choice for most vacationers. You pay one upfront price at the beginning of your vacation; and after that you can forget about money and just enjoy yourself.

There are different types of all inclusive vacation resorts which cater to different types of vacationers. Some are designed for families; others for couples, singles, and even gay people; and each resort has special activities, programs, entertainment, and events which cater to its particular clientele. There are even hedonistic all inclusive beach resorts which offer nude beaches, swimming pools and hot tubs; and even nude marriage ceremonies! Just as there are many different types of all inclusive resorts, the services and activities offered differ from one resort to another. Some all inclusive packages include only the airfare and lodging, whereas others include meals, drinks, entertainment, tours, and transfers. There are other packages which include all meals, drinks, and activities, but not airfare. It is usually cheaper to pick an all inclusive vacation package which includes the airfare instead of spending for airfare separately (unless you have frequent flier miles to use up).

The chief criticism of all inclusive vacations is that most guests never leave the resort since everything is provided right there, for free; so people don’t really interact much with the local people and culture. Of course, all inclusive vacations are not for everyone. If you are the type who likes to get away and poke around on your own – and you are not overly worried about how much money you are spending – then all inclusive isn’t for you. However, most all inclusive resorts offer tours to cultural and scenic attractions in the area, and many devotees of all inclusive take advantage of these opportunities to use their hotels as a base from which to explore the surrounding area, and then return at night to relax in the lap of luxury once more. Since so many people’s travel budgets have been slashed in the past few years, all inclusive vacations are more popular than ever before; all inclusive vacations are the perfect solution for people who want to enjoy themselves to the max within a strict budget.

 

While people from the Northern part of India have always been considered the front-runner whenever it comes to big fat, elaborate Indian weddings; southern zone of the country has never been far behind in terms of rich, culturally elaborate weddings. Though natives from South-India have always known to be simple and subtle in their ways and traditions yet their wedding rituals are quite interesting and rich in appeal.

Many a kinds of weddings are held down south from Andhra Pradesh to Kerala, Karnataka to Tamil Nadu – In the most beautiful ways. Be it a Hindu wedding, a Muslim or a Christian wedding in this part of the country – Weddings have always been worth a festivity.

The Tamil Brahmins or Keralite Vishwakarmas or the Nadar Christians – Weddings in these communities will keep you awestruck with the rich cultural and aesthetic value they emit from their rites and rituals.

In the southernmost part of India, that is the state of Tamil Nadu – There are several communities with a variety of rites and rituals. The Tamil Brahmins, the Tamil Iyers, the Tamil Nadars – These are various communities rich in traditional culture and the same is reflected in their weddings.

When it comes to weddings among Nadars, it is an elaborate affair for the families. A typical Nadar matrimony ceremony includes several kinds of ceremonies with a distinctive meaning and rituals and is hence celebrated with much pomp and show.

After a customary confirmation among families and the boy and the girl for the matrimonial alliance, the wedding is announced by the eldest member or the priest in the family among all relatives, friends and important community members.

The first of the pre-wedding ceremonies is the flower garland wearing ceremony in a typical Nadar wedding. The bride-groom’s parents, elders, relatives and friends come down to the house of the bride carrying gifts, new clothes, jewelry and gifts for her. They bring large and beautiful garlands of flowers for the bride and she is decked up in flowered jewelry by the mother of the bride-groom. In case of absence of the mother of the bride-groom, the ritual is covered either by the sister or the sister-in-law of the bride-groom. They are then followed by all other female family members of the bride-groom who take turns in decking up the bride with flowered jewelry. The bride is hence blessed and smeared with vibhuthi or kungumam by all elders present there.

Following this, the eldest members of both the families are made to sit across each other and exchange gifts among both the families in terms of cash, clothes, fruits, flowers and jewelry on the thambulam or the welcome plate; after honoring each other with vibhuthi and flower garlands. Next in suite is the pattu kattuthal ceremony which is honored by the bride-groom’s family in the bride’s house by blessing the bride with a beautiful new silk saree. The bride is then blessed by the elders in the family who apply vibhuthi or kungumam on her forehead.

The gold-melting ceremony is an interesting ceremony among the Nadars and is necessarily held at the bride-groom’s residence. A beautiful traditionally designed thali is made by the bride-groom’s family and gifted to the family of the bride-groom. A small piece of gold is put on the thali by the bride’s family for gold melting. A goldsmith melts the gold piece and performs a puja and takes along a small part of the melted gold with him. He is escorted out of the house by a woman with a child as she is considered auspicious with her child.

After the gold melting ceremony, there is a puja ceremony held in both the houses of the bride and the groom. A palmyrah stick, smeared with turmeric powder and kungumam with mango leaves tied to it. It is then worshipped with rice kept in a vessel in front of it which is later given off to a woman who measures the rice.

A day or two before the wedding, the families of the bride and the groom perform puja to the Almighty and souls of their ancestors seeking blessings for the wedding and the couple’s happy married life.

Among the Nadars, the engagement or the betrothal ceremony is generally held a day prior to the wedding day. This includes the ceremonial exchange of rings and pre-wedding vows between the bride and the bride-groom.

On the day of the marriage, the maternal uncle of the bride-groom and the bride initiate the customs. They individually garland their nephews and niece respectively and offer their blessings to the to-be-wed. The bride is then gifted a saree by the bride-groom’s female family members which she wears for the marriage. Hence after a thali is tied around her neck by the bride-groom and after seeking blessings from elders, they apply vibhuthi on each other’s forehead and exchange garlands. After the villakku darshan of the couple by the brother of the groom, the couple is offered to consume milk and banana. The rituals finally get over by the oil bathing of the newlywed by the groom’s family after which the bride leaves for her husband’s house. After offering of prayers, the couple again comes back to the bride’s house where the day gets over with a sumptuous feast by the bride’s family.

The marketing approach techniques are countless. There are many ways to approach the potential customer. There are two marketing approaches that are very interesting, due to their specific techniques. They are viral marketing and direct marketing.

The Viral Marketing is a marketing technique that is using the social networks, both online and offline, for transmitting the message or advertisement, through self replicating viral process. This process resembles to spreading computer viruses or biological viruses.

Almost anything can be the subject of viral marketing effect: information, web link, video clip, e-Books, etc.

Methods of viral marketing expansion can be:

Word of mouth – simple communication between people who knows each other.

Social Media such as Facebook are the perfect examples of viral media. The number of people who are using these services is huge. The members of these social media environments are connected very well, since every user has many contacts. Finally, method of sharing idea or message is very simple, through different sharing techniques.

“Invite Your Friend” calls from different e-services. These messages that provokes the actions are moving significant part of population who wants to share the message, but they are not willing to invest effort.

Advantage of viral marketing is that it takes very little or no investment. The viral marketing system is powered by the will of transmitters to pass the message further. The power of exponential growth is tremendous. If every person is distributing the information to 5 people and further, this gives are 3.125 informed people after 5 levels from original message transfer. The viral marketing experts know this formula very well, therefore, the viral marketing is part of marketing techniques portfolio.

Disadvantage is that viral marketing is not reliable as a standard method of information transfer, since it is not likely that every idea will be transferred at the same rate. Simply, the outcome of the viral marketing campaign is unpredictable, since the power of campaign depends of many parameters.

Also “viral competition” dictates the effectiveness of viral campaign. If two similar campaign are present at the same period to the similar audience, it is likely that the social group will transfer the message that seems more interesting at the moment.

There is no secret formula for guarantied success of Viral Marketing campaign, but good ideas, with tone of humor, anticipation and value adding elements can help the viral marketing campaign to succeed.

On the other hand, Direct Marketing is a sales method where advertisers approach potential customers directly with advertisement, products or services. The most usual methods of direct marketing are telephone sales, solicited or unsolicited emails, catalogs, leaflets, brochures, direct visits etc.

There are two main differences that distinguish it from other types of marketing. The first characteristic of direct marketing is that the message is transferred directly to consumers, without use of intermediate communication media and mass media campaign. The second characteristic is “call to action” principle of communication to the consumers.

Direct marketing is attractive to many companies since the campaign results can be measured directly. For example, if a marketer sends out 5,000 messages by mail and 250 respond to the promotion, the company easily calculates that campaign gave 5% response rate.

On the other hand, the measurement of other media ( TV, Radio ) must often be indirect, since there is no measurable calculation of message recipients. Measurement of results is a key element of every activity.

Direct marketing is practiced by businesses of all sizes – from the smallest start-up company to the multinational corporations. The decision of using of direct marketing approach is not related to the size of the company. If the niche of targeted population is too small, the direct marketing may pay off more than large scale advertising campaign.

The Direct Marketing and Viral Marketing have completely different approach. The power of both marketing approaches can be leveraged, depending on the situation. Every person is the potential shopper, it only takes a little to trigger the shopping mechanism.

 

As a small business owner, you most likely spend quite a large amount of time trying to discern new ways to gain customers. Marketing can be a fun or stressful business. They key is to understand the types of marketing.

Instead of sending your marketing budget in many different directions, you can choose a specific type and be consistent with it. You will quickly see that your marketing budget pays off much more quickly.

Here, you will find information on four of the main types of marketing. This way, you will be able to choose the marketing actions that will work best for your business. You will then be able to point your marketing budget in the right direction.

1. Blanket marketing is a type that is often used by larger business. Blanket marketing means that you spend money advertising to everyone. Many people choose to do blanket marketing by advertising in magazines or newspapers. You will not really have control of who sees your advertising, but you will have the potential to reach many people.

The downside to blanket marketing is that it can be quite expensive, and you could be wasting money marketing to people who may never become your customers at all. Blanket marketing is best for those who have plenty of funds available and who feel that they will be able to gain many customers from the plan.

2. Targeted marketing is a method in which you choose a certain demographic and only market to them. This could mean that you advertise to everyone in a certain area. Alternatively, you could advertise to everyone in a certain age range.

The great thing about targeted marketing is that you will have a much better chance at getting customers since you will be advertising to the types of people who would most likely become customers. The downside is that it will take a little legwork to determine who your target is and then find the right way to advertise to them.

3. Social media marketing could be called the new kid in town since it is relatively a young concept. With this marketing, you use any one of the many popular social media sites to advertise your company. You can also use a daily blog to garner business.

The downside to this type of marketing is that you will be sending your information out to many people who may not be interested at all. With blogs, you will have to take the time to keep the blog up to date. Otherwise, people may stop reading it.

4. The last type of marketing is not marketing at all. There are not upsides to this. It may seem like a way to save money, but when your business fails, you will actually lose a great deal of money. It is extremely important to find marketing funds within your budget.

You may be wondering if the title of real estate consultant is a meaningful one, and if it indicates anything different from the same old licensed real estate brokers with a vested interest in the fate of a property. While it is true that anyone can call himself or herself a consultant, the term is not meaningless window dressing. For those who take their real estate consulting business seriously, it represents a different model, a different approach to real estate practice.

The first and most important difference is objectivity. Whereas a real estate broker typically is paid contingent on an outcome-in other words, they receive a commission-a real estate consultant is paid solely for their expertise. They have no stake in the outcome. Salespeople are paid only for getting a result-a sale. Real estate consultants are paid for their expert advice only, and by design have no stake in achieving a particular outcome to a particular transaction. This gives them the capacity to be more objective and inherently more trustworthy than a traditional real estate salesperson. Think about it-even the most honest salesperson will unconsciously try to steer you toward a sale. After all, that’s where their pay comes from-from selling! The consultant is paid the way other professional advisors or service professionals like CPAs are, with a retainer regardless of outcome.

Consulting can involve a variety of skills and areas of expertise. You can hire a consultant for legal advice, market research, or to locate possible properties to invest in, among other things. Since they are paid as much for their time if they advise you that there are no properties in an area worth investing in as if they advise you of dozens of viable properties, they have no stake in anything except giving you the best advice possible. After all, their future business depends on word-of-mouth endorsements from investors like you.

If you are looking for properties to invest in, a real estate consultant can tip you off to developer closeouts and bulk opportunities, equity partnerships, joint ventures, and possibly even some very unique and profitable turnkey investment opportunities. The consultant is selling information and expertise, and therefore can provide you with a layer of insulation between you and the people selling the properties. They can work out a lot of the details and business prospects of a property before you have to talk to a salesperson. Once you face the salesperson, you can approach the negotiation fully armed with an array of appropriate information, and thus avoid being bamboozled and negotiate from a position of strength.

If, on the other hand, you are selling properties, especially if you have a lot of properties to sell, a real estate consultant can help you create a strategy to sell the units before you get involved with actual salespeople, which can have many advantages. For example, you can sell a lot of properties in a relatively short time without creating the appearance of a bulk sale by having a real estate consultant distribute the properties among several different sellers.

 

Most pet guardians consider their pet’s family members. After the death of a pet, many pet owners undergo all of the human bereavement processes. Animal reincarnation is a new spiritual perspective and resource for pet loss grief support.

Are animals’ and pets’ soul contracts are real. Yes! The first type of animal soul contract is called “Karmic.” A karmic contract affects destiny within a single incarnation. A Karmic contract is limited to that particular lifetime and can still be segment of a larger soul commitment for multiple reincarnations within an owners life. Here are a few examples:

1. A bomb squad dog that dies discovering a mine field to save his platoon.

2. A therapy dog that inspires an assisted living home’s Alzheimer’s patient to speak for the first time in many years.

These are experiences that affect their human companion’s destiny. The animal’s Karma (or soul’s choice) facilitated the outcome of the interaction with that human.

The number of agreements made between a pet’s soul and their person determine the quantity of pets’ past lives an animal will share with their companion in a single life or throughout multiple lifetimes.

Below are several types of pet spiritual arrangements that an animal can configure in his reincarnation process:

Oversouling: Is when the late pet contracts to direct a new or former pet from a “higher” perspective.

Walk in contract: Is when the deceased pet’s energy moves into another pet’s body that has agreed to relocate when the departed pet’s energy reincarnates.

Soul braiding: Is a shared contract when the deceased pet returns as a roommate within a current pet’s body.

New body contract: The pet’s energy that passed returns in a new physical form.

Animal afterlife is the timeframe when a pet’s life force energy resides in a sacred place after they have transitioned over the Rainbow Bridge. A pet’s soul can be “in-service” or live in this dimension forever or they can choose to reincarnate.

Therefore after the death of a pet and during your pet loss grief, hold faith in your heart that your pet’s life force energy and love is never ending. The reincarnation process has been embraced by many of the world’s oldest religions. Even if you’re a skeptic, what have you got to lose by considering the possibility?

If it’s what you contracted to do, it might just be only a matter of time until your beloved animal companion returns to be with you!

One of the most important skills you should look for in your selection of a real estate agent is his or her communication skills. A real estate agent’s ability to effectively communicate with all parties involved in a transacation can effectively make or break a deal.

At the top of the list of communications traits to seek in a real estate agent is listening skills. Yes, communication involves not only the effective transmission of information, but most importantly the receipt of information. A real estate agent should ask you questions, and then listen (which means internalize and digest) the information that you are transmitting to them.

Common questions which the real estate agent should ask include queries as to your financial situation. This is important so that the real estate agent can effectively guide you in the right direction when it comes to your need for both purchasing and selling a home.

Communication also involves you, however. The most effective communicator is unable to provide much assistance if you do not provide them with the information he or she requires. A good real estate agent will know how to obtain this information from you, by asking key questions regarding important topics that you might not have considered to volunteer but which are nevertheless crucial for the agent to do his or her job.

Questions asked may include the time frame for buying or selling a home, the amount of down payment you have available, whether or not you are a first time buyer, and of course questions about neighborhood, school and other requirements.

Effective communication is also required with respect to the other parties involved. Your real estate agent should not only be able to communicate well with you, but equally well with the other parties to the transaction. The ability to calmy communicate one’s way through glitches in closings and financial negotiations benefits all of the parties involved.